VTech 5831 - VT Cordless Phone Manual Download

Page: 66 / 119

1 3

Adding Phonebook Entries

•

From the Handset idle (OFF) mode, press the joy-
stick in any direction or press the left softkey.
The Phonebook icon should be highlighted.
Press the joystick in or left soft key again.

•

Press NEW.

NOTE: When phone book is full, pressing NEW,
"Phonebook is Full" displays and an error tone
sounds.

•

You will then be prompted to Enter Name. Use
the digit keys to ‘spell’ the name. If you make a
mistake, press the

softkey. You can add

a space between characters by pressing the 1
key. When finished, press OK.

•

Enter the number you want to store in Phonebook.
Press and hold the # key to insert a pause. When
finished, press OK.

•

The screen will display:

NOTE: If there is no need to have distinctive ringing
pattern and distinctive image, you can press SAVE now.

•

If you wish the phone to alert you to calls from this
number by changing to a distinctive ringing pattern,
press the joystick

to scroll to RINGER :

Default .

•

Press the joystick or to sample the ringer
options.

— OR —

•

Press the joystick in then press the joystick

Handset Menu

Basic Operation

JOHN SMITH

SAVE

Phonebook

Summary of Contents for 5831 - VT Cordless Phone
























































































































Search results

Summary of Contents for 5831 - VT Cordless Phone

Reviews:

Related manuals for 5831 - VT Cordless Phone

Brands by name

Popular brands

VTech 5831 - VT Cordless Phone, Manual

Search results

Summary of Contents for 5831 - VT Cordless Phone

Reviews:

Related manuals for 5831 - VT Cordless Phone

Brands by name

Popular brands