8
Registration
Registering an i 5801 Handset for the first time
After charging, the screen will display:
Find the BASE ID Code by doing the following (Base must
be OFF):
1)
At the Base, press MENU.
2)
Scroll down to DISPLAY BASE-ID, then press OK.
3)
Enter the 15-digit Base ID Code into the Handset. If you make a
mistake, move the joystick to the left (
) to backpace or press the
right softkey
to erase a character.
4)
Press OK to complete the registration process.
NOTE: If the Handset, after charging, says “Searching for Base...”, press the
NEW soft key. “Enter Base ID” will now be displayed. Follow the steps above.
Wait approximately 15-60 seconds. You will hear confirmation beeps from the
Base and Handset. The newly registered Handset will now be assigned the
lowest extension number not previously assigned to a different system Handset
(1 - 6).
If you do not enter the correct digit sequence, you will see “ Invalid Base ID!” and
hear an error tone. move the joystick to the left (
) to backpace or press
the right softkey
to erase a character, and carefully re-enter the Base
ID Code.
NOTE: The 15-digit BASE ID Code may contain numbers and characters,
such as *. Make sure you carefully enter all 15 digits.
Register
Getting S
tarted
