VTech 5831 - VT Cordless Phone Manual Download

Page: 15 / 119

Handset and Base Indicators

Handset LEDs

Description

• Flashes to indicate that you have new voicemail messages.
Service must be subscribed to through your local telephone
company

• Lights when line is being used by a Handset of the VT5831
system.
• Flashes when another telephone on the same line (parallel
extension) is in use.

• Lights when Base Speakerphone is in use.
• Flashes when HOLD function is activated.

Description

• Blinks to indicate that you have new voicemail messages.
Service must be subscribed to through your local telephone
company.

LED

Messages

In Use

Speaker Phone

LED

Message Waiting

Base LEDs

ASIC OPERA

TION

Base Unit Icons

Description

Ringer Off indicator
is displayed when the Base ringer is turned off.

Battery indicator
Cycles (Low, Medium and Full) when a battery pack is
charging in the spare battery compartment.

Icon

Summary of Contents for 5831 - VT Cordless Phone
























































































































Search results

Summary of Contents for 5831 - VT Cordless Phone

Reviews:

Related manuals for 5831 - VT Cordless Phone

Brands by name

Popular brands

VTech 5831 - VT Cordless Phone, Manual

Search results

Summary of Contents for 5831 - VT Cordless Phone

Reviews:

Related manuals for 5831 - VT Cordless Phone

Brands by name

Popular brands