background image

45

ADDITIONAL INFORMA

TION

FCC, ACTA and IC Regulations

Before installing this equipment, users should ensure that it is permissible to be
connected to the facilities of the local telecommunications company.  The equipment
must also be installed using an acceptable method of connection. The customer should
be aware that compliance with the above conditions may not prevent degradation of
services in some situations.

Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment,
or equipment malfunctions, may give the telecommunications company cause to request the
user to disconnect the equipment.

Users should ensure for their own protection that the electrical ground connections
of the power utility, telephone lines and internal metallic water pipe system, if present,
are connected together. This precaution may be particularly important in rural areas.

Caution :
Users should not attempt to make such connections themselves, but should contact the
appropriate electrical inspection authority, or electrician, as appropriate.

Your VT5831 is designed to operate at the maximum power allowed by the FCC and
IC. This means your Handset and Base Unit can communicate only over a certain
distance - which will depend on the location of the Base Unit and Handset, weather,
and the construction and layout of your home or office.

The RBRC 

 

 Seal

The RBRC   Seal on the  nickel-metal-hydride battery indicates that  VTech
Communications, Inc. is voluntarily participating in an industry program to collect and
recycle these batteries at the end of their useful lives, when taken out of service within
the United States and Canada.

The RBRC    program provides a convenient alternative to placing used
nickel-metal-hydride batteries into the trash or municipal waste,which may
be illegal in your area.
VTech’s participation in RBRC    makes it easy for you to drop off the spent battery at

local retailers participating in the RBRC     program or at authorized
VTech product service centers. Please call 1-800-8-BATTERY     for
information on Ni-MH battery recycling and disposal bans/restrictions
in your area.VTech’s involvement in this program is part of its
commitment to protecting our environment and conserving natural
resources.

RBRC   is a registered trademark of Rechargeable Battery
Recycling Corporation.

R

R

R

R

TM

R

R

Summary of Contents for 5831 - VT Cordless Phone
























































































































Reviews: