background image

www.vsv-group.com

                                                                                                                         

 

22 

7 - FILTRATION MEMBRANE 

 

WARNING! 

Do not operate the filtration unit without filtration membrane as it can break the 

motor. 

 

In filtration blocks Aquatic water is sucked through the skimmer and cleaned through the filter 

membrane, then clean water flows back into the pool through a nozzle. Before the filtration membranes 

installed pre-filter basket designed to remove the largest size impurities, for example leaves. The 

efficiency of your filtration equipment will depend on cleanness of pre-filter baskets and filtration 
membrane. 

 

WARNING!

 Insert the filtration membranes into openings of the holding plate inside the filtration unit 

such a way that the lock ring should remain on the holding plate. Install the pre-filter baskets and switch 

on filtration unit

 

 

 

 

REPLACEMENT AND CLEANING

 

 

WARNING!

 

Replacing contaminated filter membranes can be performed only after turning off the 

filtration unit.

 

 

Switch off filtration equipment from power supply. Remove the pre-filter basket and rinse with water. 

Then remove the filtration membrane and rinse with water under pressure. You can washed filter bag in 
automatic washing machine at a temperature not exceeding 30

0

C, but in any case after being washed 

from a hose. Do not use any detergents. It is necessary clean the filter membranes not less than once a 

week, or when contaminated. 

Optimum service life of the membrane is two years. Do not use membrane after the expiration date. The 

manufacturer guarantees the quality of water treatment only with membrane VSV. 

  

WARNING!

 

If near your pool there are leafy trees, please every time check pre-filter basket and from 

plugging with fallen leaves. This impairs the efficiency of the filtration unit and may damage the motor. 

Pure pre-filter basket improves the efficiency of the filtration unit.

 

 

 
 

 

 
 

 
 

 
 

Summary of Contents for Aquatic U



























Reviews: