STEAM STRAIGHT BRILLIANCE
9
3. Place the base station onto a heat-protective, flat level surface
& push down to secure the suction feet onto the surface. This
will prevent the base station from moving around.
4. Ensure that the water reservoir on the bottom
of the straightener is empty of water & secured
in place, then place the straightener onto the
base station by aligning the 2 pins & pushing
down until the straightener slots into place.
NB -
there’s no need to close or lock the plates - you can place
the straightener onto the base station with the plates in the
open position. However, if the straightener is switched on, we
recommend locking the plates before placing the straightener
onto the base station & always wearing the heat protection
glove to avoid the hot surfaces of the straightener coming into
contact with the skin.
TIP - To avoid the straightener from overfilling, always ensure
that the straightener water reservoir is nearly or completely
empty of water before placing onto the base station for refilling.
5. As soon as the straightener is correctly in place, the water
will automatically refill within 10-15 seconds & the straightener
is then ready to use.
NB -
the straightener doesn’t need to
be switched on to refill with water, BUT if the straightener is
switched on, we recommend locking the plates before placing
the straightener onto the base station & always wearing
the heat protection glove to avoid the hot surfaces of the
straightener coming into contact with the skin.
6. Remove the straightener from the base station & press the
On/Off
( )
button to turn your straightener on. The default
140°C LED indicator will illuminate & start to flash. At this point
the straightener will start heating up.
7.
Press the steam
( )
button once to switch on the steam
function. The steam LED indicator will illuminate.
8.
When using the steam function & the plates are closed, the
straightener will make a clicking sound. This is completely
normal & part of standard operation as the pump is pushing
the water through the inside mechanism.
Summary of Contents for VSS9900A
Page 3: ......
