STEAM STRAIGHT BRILLIANCE
10
9. To refill the straightener water reservoir, you can simply click
the straightener onto the base station in between brushing
& sectioning your hair, being careful not to touch the hot
surfaces of the straightener. No fussing or fiddling required!
TIP - To avoid the straightener from overfilling, always ensure
that the straightener water reservoir is nearly or completely
empty of water before placing onto the base station for refilling.
IMPORTANT - The base station should only be used for refilling
the straightener water reservoir. Please do not rest the
straightener on the base station when not in use.
10. Once you’ve finished styling your hair, ensure you empty all
the water reservoirs:
a) Base station water reservoir - empty water from the top
section of the base station by lifting the black rubber plug
on the top & pour remaining water into a sink.
b) Base station bottom tank - empty water from the bottom
section of the base station by lifting the black rubber plug
on the bottom & pour remaining water into a sink.
c) Straightener water reservoir - remove the water reservoir
from the bottom of the straightener, lift the black rubber
plug & pour remaining water into a sink.
ALWAYS remove excess water from the base station water
res the base station bottom tank + the straightener
water reservoir after use, since leaving unused water in the
reservoirs can cause clogging over time.
NB - NEVER add any other liquid aside from distilled water to
the water reservoirs.
Summary of Contents for VSS9900A
Page 3: ......
