manualshive.com logo in svg

VRmagic Eyesi, Installation And Operating Manual, Page: 9 / 80

Share
Download
VRmagic Eyesi Installation And Operating Manual Download Page 9

 

• Reorient or relocate the receiving antenna.

 

• Increase the separation between the equipment and receiver.

 

• Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected.

2.5  General Product Safety

Use and handle the simulator only in accordance with the instructions and informa-
tion in the provided guides. Any other use can lead to personal injury, material dam-
age or damage to the simulator. Only use the simulator if all components are in a 
faultless condition.

Assembly, commissioning, maintenance and operation may only be carried out by 
personnel who have read and understood this manual.

2.6  Transport and Unpacking

The shipping boxes are heavy. Trying to move or to lift the shipping boxes on your 
own could cause injury or damage to the simulator. The shipping boxes should be 
carried by two people only.

After transport, do not throw away the original packaging (shipping boxes and pack-
aging material). The original packaging is the safest way to transport the simulator. 
After unpacking everything, place all packing materials back into their respective 
transport boxes for future use.

2.7  Installation Location and Ventilation

The simulator is designed for indoor use only. Select a setup location that complies 
with the ambient conditions specified in the technical data. Make sure that the simu-
lator is not exposed to extreme temperatures or humidity. Never set up and operate 
the simulator close to highly inflammable gases.

The simulator PC generates heat during operation. Overheating can cause tempo-
rary malfunction or permanent damage to the simulator. To avoid overheating:

 

• Make sure that the operating environment is well ventilated.

 

• Do not block the air vents of the simulator PC.

 

• Do not allow dust to build up on the air vents.

 

• Set up the simulator PC at least 10 cm (4”) away from walls or other objects 

which may block ventilation.

 

• Do not place the simulator PC on a carpet or rug with long fibers.

 

• Do not place the simulator PC in a narrow or cramped space.

 

• Do not cover the simulator PC during operation.

9

Safety

Eyesi Surgical Simulator – Installation and Operating Guide

Summary of Contents for Eyesi

















































































Reviews:

No comments