manualshive.com logo in svg

VRmagic Eyesi, Installation And Operating Manual, Page: 32 / 80

Share
Download
VRmagic Eyesi Installation And Operating Manual Download Page 32

Fig. 21: Adjusting the voltage setting

6. 

Turn the voltage selector around to adjust the simulator to the existing power 
supply voltage (4) (

Â

 see figure above).

7. 

Insert the voltage selector into the switch again (5).

 

▷

The correct voltage should now be displayed in the small viewing window 
of the voltage selector switch.

8. 

Insert the fuses into the switch again (6).

9. 

Insert the voltage selector switch into its socket.

 

▷

The voltage setting is changed.

4.12 Placing the Simulator in its Final Location

 Caution 

Risk of injury

The simulator is heavy. Trying to move or to lift the simulator on your own 
could cause injury or damage to the simulator.

 

f

The simulator should be carried by two people only.

Placing the simulator in its final location:

1. 

If not already the case, place the simulator in its final location. Make sure the 
connections on the backside of the simulator PC remain easily accessible.

2. 

If necessary, adjust the 4 leveling feet under the support feet until the unit is 
leveled and does not wobble.

Eyesi Surgical Simulator – Installation and Operating Guide

32

Installation

Summary of Contents for Eyesi

















































































Reviews:

No comments