manualshive.com logo in svg

VRmagic Eyesi, Installation And Operating Manual, Page: 52 / 80

Share
Download
VRmagic Eyesi Installation And Operating Manual Download Page 52

Fig. 43: Screws of the mounting receptacle

Dismounting the monitor arm:

1. 

Check that the touch screen is dismounted (

Â

 section 6.1.5 on page 51).

2. 

Underneath the operating table, loosen the screws of the DVI connector on the 
front side of the simulator PC. Unplug all connectors and plugs coming from 
the monitor arm. Make sure to unlock the locking mechanism of the VRx plug 
(

Â

 section 6.1 on page 49).

3. 

Slightly loosen the four screws underneath the mounting receptacle on the 
right side of the operating table. One full revolution should be sufficient. Do not 
try to remove the screws.

4. 

Pull the monitor arm out of the mounting receptacle. Lead the cables through 
the receptacle opening. Leave the receptacle mounted.

6.1.7  Power Connection

1. 

Lower the operating table to its lowest position by pressing the toggle switch 
on the front of the operating table (

Â

 section 5.4 on page 41).

2. 

Disconnect the main power cable running from the lifting column to the power 
source.

Eyesi Surgical Simulator – Installation and Operating Guide

52

Disassembly, Storage, and Transport

Summary of Contents for Eyesi

















































































Reviews:

No comments