17
Contact a Subscriber
Under the "Welcome!" mode, enter User ID number (from 1 ~ 999999) and then
press
CALL button.
If the ID exists, the system will start dialing and show “Calling…” on the screen.
When the phone is connected, the screen will show “Talking”.
If the ID does not exist, the screen will show “Incorrect!”.
If the ID exists, but there is no number assigned, the screen will show “Calling…”,
but will never connect and then time out after 3 minutes. In order to avoid this
problem, please make sure to input the phone number on each User ID.
If the dialing fails, the screen will show “No dial tone” and go back to standby
mode.
If the call is not answered within one minute, the screen will show “No answer”
and go back to standby mode.
During conversation, if the other party hangs up or the line is cut, the screen will
show “No carrier” and go back to standby mode.
During conversation or while dialing, pressing F1 (Menu/Exit) or F2
(Delete/Cancel) button will stop the conversation.
Open the Door Remotely
During conversation, the called party can press the
＊
＊
＊
＊
button to open the
door. The door-open time can be set by user. The default setting is 3 seconds.
Go Back to Standby Screen Automatically
If the manager password has been entered and no button is pressed within 30
Calling- - -
Incorrect!
No dial tone!
Welcome!
No answer!
Welcome!
No carrier!
Welcome!
Talking- - -
Calling- - -
Time’s Up!
