18
seconds, the screen will go back to the standby mode – “Welcome!”
If a Subscriber ID is entered and no button is pressed within 6 seconds, the
screen will go back to the standby mode.
If no button is pressed within 30 seconds under the Manager or Subscriber
option, the screen will go back to the standby mode.
SIM Card
If the SIM card is not inserted, the screen will show “SIM not Inserted” when
the system is turned on.
Call Manager
If “Manager Phone #” has been programmed, the system will directly dial this
number while the visitor presses
CALL button at the standby mode.
If “Manager Phone #” is not stored, no action will be taken by pressing the
CALL button
Master Reset
The following operation will make the unit back to factory default. Please note
that this will erase all passwords, phone numbers and subscribers.
At the Standby mode, press F2(C),
＊
＊
＊
＊
(
UP),
＊
＊
＊
＊
(
UP),
＊
＊
＊
＊
(
UP),
＃
＃
＃
＃
(
DOWN),
＃
＃
＃
＃
(
DOWN),
＃
＃
＃
＃
(
DOWN) and
CALL buttons in sequence. It will show “Initial
System Please Wait…”, then all is back to default.
SIM not Inserted
