9
Wiring Instructions
1. System Power Supply Wiring
The system power supply (adapter) AC 120V or 230V / DC 13V is provided
along with the system (please note whether it can meet local voltage
specification).
The negative wire is connected to Terminal Pin 1 and the positive wire is
connected to Terminal Pin 2.
2. Install Door Lock with System Power Wiring
The door lock power may be supplied from the system by connecting the
positive wire of the lock to Terminal Pin 4 and the negative wire to Terminal
Pin 5. The ACK wire, if your strike has one, is connected to Terminal Pin 6.
(The system will supply 12 volts DC at 1000mA.)
3. Install Door Lock with its own Power Supply Wiring
If the door lock comes with its own power supply or requires more power than
what this unit provides, then the power should be connected as follows:
Remove the jumper wires joining Terminal Pin 2 and Terminal Pin 3. Remove
the jumper wires joining Terminal Pin 1 and Terminal Pin 5 as well. The
positive wire of the power supply is connected to Terminal Pin 3 and the
negative wire to Terminal Pin 5.
The door lock’s positive wire is connected to Terminal Pin 4 and the negative
wire is to Terminal Pin 5. The ACK wire, if your strike has one, is connected to
Terminal Pin 6.
