VOX electronics MX-9105, Operating Instructions Manual

Page: 5 / 86

3
Remove any packages, disassemble any detachable parts. Clean the dough hooks and
beaters. Before assembling the mixer, make sure the power cord is unplugged from the
power outlet and the speed selector is at the “ 0
” position.
USING YOUR MIXER
1. Assemble proper beaters or dough hooks into mixer.
NOTE : Beaters can be inserted in either socket, as the beaters are identical. For dough
hooks, the one with washer can only be inserted into the bigger socket and the other one
can only be inserted into smaller one. The two dough hooks cannot be inserted in
reverse.
2. Ensure that the unit is at the
“0”
setting, and then plug in the power source.
3. Set the speed selector to your desired speed. There are 6 speed settings to be selected.
When kneading yeast dough, we suggest selecting the speed selector to lower speed
and then to higher speed as to achieve the best results. The mixer will run at the highest
speed when pressing turbo button .
WARNING : Do not stick knifes, metal spoons, forks and so on into the bowl while
operating.
4. The maximum operation time per use shall be less than 5 minutes. Minimum 20 minutes
rest time must be maintained between continuous two cycles.
NOTE : During operation you can rotate the bowl with your hands as to achieve the best
results.
5. When mixing is complete, turn the speed selector to “ 0
” setting, and unplug the cord
from power outlet.
6. If necessary, scrap the excess food particles from the beaters or dough hooks by rubber
or wooden spatula.
7. Hold the beaters or dough hooks with one hand and press the Ejector button firmly
down with the other hand as to remove the beater or dough hooks.
NOTE :
1) Remove the beaters or dough hooks only when the speed selector is on the “ 0
”
setting.
2) While operating, you can put the mixer vertically, but make sure the speed selector is
on the “ 0
” setting.
BEFORE USING MIXER