13
How to check that your VOSS.miniPET works correctly?
You can check anytime that your VOSS.miniPET is ope-
rating correctly.
•
Before doing so, make sure that the receiver is
switched off.
•
Place the test discharge lamp in contact with each
of the contact points, as shown in the picture.
•
Switch on the transmitter and receiver.
•
Press the stimulation button and modify the level
of intensity of the stimulations: the test lamp will
light up with more or less intensity according to
the selected intensity level.
Location of the test lamp attachment.
Getting the best results
The training commands are transmitted to the receiver by radio waves. The range of the C200 is
approximately 200 metres and for the C900 – 900 metres depending on the geographic conditions.
The transmitter range may vary depending on the way you use your transmitter.
