7. Check card
8. Declaration of conformity
Albert KERBL GmbH hereby declares that the product / device described in these
instructions complies with the fundamental requirements and other relevant
stipulations and regulations. The CE mark confirms compliance with the Directives of the
European Union.
9. Electronic scrap
Disposing of this device after its service life is the responsibility of the operator.
Please consult the valid national regulations. The device must not be disposed of in
household waste. In accordance with the stipulations of the EU Directive on the Disposal
of Electrical and Electronic Devices, the device can be disposed of free of charge at the
local waste collection or recycling centre. Alternatively, it can be returned to retailers who
offer a collection service. The proper disposal helps to ensure environmental protection
and prevents any adverse effects on human health and the environment.
Serial number
Check
Before installation
After installation,
but before connection
of the power supply
Fault-free condition
Cable resistance in Ohms
Insulation resistance in
MOhm
Installation location
(a description)
Installation date
Name, address
and signature of the
installation company
(stamp + signature)
Ensure that this card is filled in and signed by an authorised electrician and that it is kept safely.
