Vortice VORT HRW 30 MONO EVO WiFi, Instruction Booklet

Page: 25 / 132

25
professional or contact an authorized VORTICE Service Centre.
• Do not leave packaging within reach of children or individuals with disabilities.
• Certain basic rules must always be observed when using any electrical appliance: never touch the appliance with wet or
damp hands; never touch the appliance when barefoot.
• Do not operate the appliance in the presence of flammable substances or vapours, such as alcohol, insecticides, petrol,
etc.
• If the appliance is to be disconnected from the power supply and no longer used, store it out of reach of children and in-
dividuals with disabilities.
• Do not make modifications of any kind to this appliance.
• The maintenance instructions must be followed to ensure the appliance does not suffer damage and/or excessive wear.
• Do not expose this appliance to the elements (rain, sun, etc.).
• Do not stand objects on the appliance.
• The inside of the appliance must be cleaned only by a skilled professional.
• Inspect the appliance periodically for visible defects. If the appliance is defective in any way, do not use it; contact a
VORTICE authorized Technical Support Centre without delay.
• If the appliance does not function correctly or develops a fault, contact a VORTICE authorized Technical Support Centre
without delay. Ensure that only genuine original VORTICE spares are used for any repairs.
• Should the appliance be dropped or suffer heavy impact, have it checked without delay by a VORTICE authorized
Technical Support Centre.
• The appliance must be installed in such a way as to ensure that under normal operating conditions, no one can come into
contact with any moving parts or live electrical components.
• In the event of: dismantling the appliance with the appropriate tools, removing the heat exchanger or removing the motor
module, the appliance must first be switched off and disconnected from the electrical power supply.
• Connect the appliance to the electrical power supply/socket only if the rated power of the supply is compatible with the
maximum rated power of the appliance. If not, contact a professional electrician without delay.
• Turn off the appliance at the main switch: if the appliance does not function correctly, before cleaning the outside of the
appliance, or if the appliance is not going to be used for any length of time.
• The flow of extracted air must be clean (i.e. free of grease, soot, chemical and corrosive agents and explosive or
flammable mixtures).
• Keep the air intake and outlet ports of the appliance free of obstructions, to ensure optimum air flow.
• Operating temperature range: -20 ÷ 50°C.
• Specifications for the power supply must correspond to the electrical data on ID plate A (Fig. A).
Structure and equipment
Components common to all models
The main components of the device are:
• main body (
1 ) already assembled which includes:
- Body with pre-assembled plug-in terminal block, frontal grille and aesthetic panel in self-extinguishing polycarbonate
(PC).
- Motor holder and push-button panel in ABS material.
- 5-speed reversible EC fan.
- Integrated electronic board.
- Closing device (disk) sealing the front panel to prevent temperature changes in the winter months and the entry of
pollutants and odors from the outside.
- Washable internal filter with frame.
• Flange ( 2 ) wall mountable with pre-assembled terminal block.
• Terminal block cover with screw and cable gland ( 3 ).
• PVC pipe for installation inside walls with thickness from 260 mm (283 mm VORT HRW 40 MONO EVO) to 700 mm
ENGLISH
Caution:
this symbol indicates that care must
be taken to avoid damaging the appliance
!
A