Maintenance/Cleaning
Filters
The user is responsible for the periodical maintenance
of filters. The filters have to be periodically cleaned to
ensure that the appliance continues operating efficiently.
They should be replaced at least once a year.
To access the filters, follow the instructions below:
• disconnect the appliance from the mains.
• remove the filters from the appliance (figs. 27,28)
• clean the filters using a vacuum cleaner; you are
advised to replace the filters after cleaning them a few
times but least once a year.
• refit the filters (figs. 29)
• position the cover slides (fig. 30)
If the appliance remains out of use for extended periods,
we advise removing the filters to prevent any possible
damage from the build-up of condensation.
Heat exchanger
Heat exchangers do not need cleaning. Any need for
cleaning can be determined by a high degree of air
pollution (both entering and leaving the house) and by
the filters being in poor condition.
The heat exchanger should however be replaced every
six years even if the filters have been regularly serviced.
To access the heat exchanger, follow the instructions
below:
• disconnect the appliance from the mains;
• remove the heat exchanger (figs. 31,32,33);
ENGLISH
27
28
29
26
30
Summary of Contents for VORT HR 200
Page 27: ...clean the heat exchanger re t the heat exchanger gs 34 35 36 ENGLISH 31 32 33 27 34 35 36...
Page 34: ...34 NOTE...
Page 35: ...35...
