28
ENGLISH
Improper use -
prohibition of use
1.
Performing checks or maintenance operations with
the machine running or being powered is strictly
prohibited: ALWAYS CUT OFF THE CURRENT!
2.
Do not expose the machine to extreme temperatures:
the formation of ice can cause serious damage to
the high pressure pump.
3.
Wear
protective
clothing
when
performing
maintenance.
4.
When the misting unit is used to spray substances
other than water, these substances must be
completely dissolved in it and they must have no
harmful characteristics for persons present in the
environment. Furthermore, NO alcohol or oil-based
substances or substances with a pulverised part
greater than 5 micron can be used, in order to avoid
damaging or obstructing the micrometric nozzles
and the mechanical components of the unit itself.
The manufacturer is not responsible and shall not
cover any damage caused to third parties as a result
of improper use of the unit, particularly when it is
used to dissipate unrecognised substances in the
environment as authorised by local laws or by the
manufacturer itself.
Never remove the labels from the machine. Request
new labels if they have become damaged. The
manufacturer and the supplier are relieved of all
responsibility in the event of accidents or breakage
due to a failure to observe the warnings, which will
cause immediate invalidation of the warranty
conditions.
!
Never remove the labels from the machine.
Request new labels if they have become
damaged. The manufacturer and the supplier are
relieved of all responsibility in the event of
accidents or breakage due to a failure to observe
the warnings, which will cause immediate
invalidation of the warranty conditions.
Intended conditions of use
The ideal conditions for placement of the unit are in
environments protected from the weather, ventilated
and with temperatures no higher than 40°C.
The most suitable conditions for use of the
cooling/humidification
system
are
those
with
temperatures higher than 27-28°C and relative
humidity less than 80%. It is advisable to correctly
calibrate the water flow rate if the unit is going to be
used both for summer cooling and for winter
humidification. In humidification, a cyclic timer will be
used to reduce the misting on the timer unit Therefore,
on a one-minute basis, activity will be limited to 5-10-
15 seconds, in accordance with the amount of humidity
to be achieved. In summer, the unit will return to
continuous
operation.
Contact
an
authorised
manufacturer technician for this operation.
Summary of Contents for 5571.084.160
Page 1: ...ACQUA BREEZE SYSTEM COD 5571 084 160 28 02 2019 Libretto istruzioni Instruction booklet...
Page 54: ...54...
Page 55: ...55...
