VIPER
®
HD
3000
18
19
When Extended Laser Range
Mode (ELR) is selected, “ELR” will
be displayed in the upper segment
of the display. Once “Measure” is
pressed, “ELR” will disappear from
the display, but the unit remains in
ELR Mode. If powered down in ELR
Mode, “ELR” will be displayed
each time the unit powers back on.
Note: While using ELR Mode, it may take longer to acquire a
target depending on the target’s size, distance to the target,
reflectivity of the target, and the environmental conditions.
RANGING
Ranging in Normal Mode
With the Viper
®
HD 3000 powered
up, position the reticle on the
target object and press and release
the “Measure” button to get the
distance measurement. If the laser
is not able to range due to the
reflectivity of the target, you will see
a display similar to that shown here. To range a new target,
simply re-aim and press the “Measure” button again.
No Range Returned
Scan Feature
Activate Scan Feature by pressing
and holding the “Measure” button
down. Keeping the button depressed
will continuously measure distance
as you pan back and forth across
target objects. “Scan” will blink as
you pan. Releasing the “Measure”
button will return laser to the power
up condition.
Note: For best results, use a tripod
while attempting to range targets past
1,000 yards.
Scanning to get range:
Scan back and forth, watching for yardage number to display or change.
LOS Scan
HCD Scan
Summary of Contents for Viper HD 3000
Page 1: ...1 PRODUCT MANUAL...
