background image

VIPER

®

 HD 

3000

6

7

Low Battery Icon

The Low Battery Icon comes on at 
25% and stays on until there is no 
power or the battery is replaced.

Adjust the Eyecup

The eyecup on the Viper

®

 HD 3000 twists in and out so 

any viewer can see the full field and enjoy comfortable 
viewing and ranging – with or without eyeglasses. When 
not using eyeglasses or sunglasses, it is recommended to 
keep the eyecup fully extended. For best viewing when 
wearing eyeglasses, twist eyecup in.

Adjustable 

Eyecup

Diopter Focus

Low Battery

Focus

Adjust the diopter until the image is sharp. Make note of 
this diopter setting in case you need to set it again.

Attaching the Wrist Lanyard

The Lanyard provides a secure way 
to carry your rangefinder.

Utility Clip

The Viper

®

 HD 3000 comes with a Utility Clip on the 

unit’s left-hand side. You can switch Utility Clip’s side by 
unscrewing the 2.5mm hex screws on the left-hand side, 
and the 2.5mm hex screws on the unit’s right-hand side. 
Reinstall the Utility Clip on the unit’s right-hand side 
and replace the 2.5mm hex screws on the left-hand side.

Utility Clip

2.5mm 

Hex Screws

Loop the Lanyard 

through attachment 

socket.

Summary of Contents for Viper HD 3000
















Reviews: