VIPER
®
HD
3000
16
17
Last Mode
This mode displays the farthest
distance when ranging. This mode
is ideal for ranging a specific target
behind a group of objects like
brush, trees, rocks, etc.
Note: If unsure about the range, simply
range again.
Extended Laser Range (ELR) Mode
The ELR Mode target mode allows for ranging smaller,
less reflective targets at extended distances. It is ideal
for ranging when Normal Mode is unable to obtain a
desired range. A longer response time may be required to
build the desired range. For best results, use a tripod.
For additional information on targeting modes, please visit
VortexOptics.com
Range captured
on farther elk.
SETTING AND USING TARGET MODES
While in ready condition, cycle
between target modes by pressing
and releasing the “Menu” button.
Once a target mode is selected,
press the “Measure” button to
activate the target mode.
When Normal Mode is selected,
“NRML” will be displayed in the
upper segment of the display.
Once “Measure” is pressed,
“NRML” will disappear from the
display, but the unit remains in
Normal Mode. If powered down
in Normal Mode, “NRML” will
be displayed each time the unit
powers back on.
For First and Last Mode, “First”
and “Last” will always be
displayed, signaling that you are
in the respective target mode.
The range measurement will
display as the Measure button is
pressed and released.
Last Mode
First Mode
Summary of Contents for Viper HD 3000
Page 1: ...1 PRODUCT MANUAL...
