P/N: 4MB020-010
©2003 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
06DEC02 V1.0(4MB HP500 v1.0)
18
2
1
12. SUPERCHARGER MOUNTING, cont'd.
H1. Engines With Power Steering Pump:
Attach the support plate to the mounting
plate and supercharger. Three of the sup-
plied 12mm washers must be placed in
between the support plate and the super-
charger cover as spacers. Install the remain-
ing three 12mm washers under the head of
each of the M12-1.75 x 30 screws. The two
1.536" lower spacers must be installed with
the Ø.750 piece in the lower hole position as
shown. (See Fig. 12-e.)
H2. Engines without power steering pump:
Remove the Ø4" idler from the factory
bracket. Attach the support plate to the
mounting plate and supercharger. Three of
the supplied 12mm washers must be placed
in between the support plate and the super-
charger cover as spacers. Install the remain-
PART #
7A375-101
7K375-030
DESCRIPTION
3/8-16 x 1" SHCS
3/8" Washers
QTY.
10
10
N0.
1
2
Fig. 12-d
ing three 12mm washers under the
head of each of the M12 - 1.75 x 30
screws. The Ø1.00 x 1.536 spacer
along with the idler spacer #1, #2 and
the factory idler in between the super-
charger mounting plate and the support
plate. (See Fig. 12-f.)
I.
Install the automatic tensioner to the
mounting plate using the 7/16-14 x
2.75 socket head bolt with washers
and 7/16 nut.
