P/N: 4MB020-010
©2003 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
06DEC02 V1.0(4MB HP500 v1.0)
16
A. Assemble the provided crank pulley and 10 rib
pulley. Line up the three corresponding mount-
ing holes in the crank pulley and 10 rib pulley.
Ensure that the "dished" side of the 10-rib pulley
faces away from the engine.
B. Using the three 3/8-16 x 4 3/4" HHCS and wash-
ers, mount the crank pulley assembly to the
balancer. Use a small amount of thread locking
compound on each of the screws. Torque each
of the screws to 35 ft/lbs.
C. Using the supplied 6 groove belt, route onto the
accessories in the stock configuration and tighten
to the stock specifications.
11.
CRANK PULLEY INSTALLATION
SUPPLIED 10-RIB PULLEY
SUPPLIED CRANK
PULLEY
STOCK HARMINIC
DAMPER (BALANCER)
3/8-16 x 4-3/4” HHCS
3/8 LOCK WASHER
3/8 SAE WASHER
Fig. 11-a
