voptech VPX-100 User Manual Download Page 53

Page: 53 / 93

Reference

Item

Explanation

Name

Define a name for DISA.

PIN Set

User will be prompted to input this number when PIN Authentication is

needed.

Record in CDR

Check to record.

Response Timeout(sec)

The maximum time for waiting before hanging up if the dialed number is

incomplete or invalid. Default is 10 seconds

Digit Timeout(sec)

The maximum interval time between digits when typing extension number.

Default is 5 seconds.

Extension for this DISA(Optional)

If you want to access DISA by dialing an extension, you can define an

extension number for this DISA.

Select DialPlan

Select the DialPlan for this DISA.

3.7 Follow Me

This feature allows callers to automatically be forwarded to one or more internal extensions
and/or one or more external phone numbers when the call is not answered at the primary
extension.

Please configure as below:
Click

【

Advanced

】

【

Follow Me

】

【

New Follow Me

】

Summary of Contents for VPX-100






























































































Search results

Summary of Contents for VPX-100

Reviews:

voptech VPX-100, User Manual, Page: 53 / 93

Search results

Summary of Contents for VPX-100

Reviews: