voptech VPX-100 User Manual Download Page 18

Page: 18 / 93

System Menu

System Menu includes the following sub menu:

Home

Display device information

Operator

Extension / Trunk / Channel Status

Basic

Basic configuration on extension, trunks, etc.

Inbound Control

Configuration of Inbound Route, IVR and Black List, etc.

Advanced

Configuration of extension's default information, Conference Call, Call
Transfer, Function Key, etc.

Network Settings

Configuration of Routing, Network, VPN, DHCP and other related
network parameters

Security

Configuration of Firewall, SSH, FTP

Report

Record List, Call Logs and System Logs

System

Time Settings, Management, Back Up and Upgrade, etc.

2.2.2 Basic Configuration

Extension Configuration

VPX Supports SIP/ IAX2 and analog extensions as well as the ability to ”Batch Add Users” by
uploading extensions file.
Click

【

Basic

】

【

Extensions

】

to configure:

Click

【

New User

】

to see the extension configuration interface as below:

Summary of Contents for VPX-100






























































































Search results

Summary of Contents for VPX-100

Reviews:

voptech VPX-100, User Manual, Page: 18 / 93

Search results

Summary of Contents for VPX-100

Reviews: