voptech VPX-100 User Manual Download Page 50

Page: 50 / 93

Reference

Item

Explanation

SMTP Server

You must set SMTP Server address or domain connected to the VPX IP PBX,

which is used for sending the voice message to Email.

Port

Port number for SMTP server. Default is 25, and it will be changed to 465 when

you enable SSL/TLS.

SSL/TSL

Enable SSL/TLS.

Enable SMTP Authentication

If your SMTP server needs authentication, please enable this option, and

configure the following.

Username

Input username of your Email.

Password

Input password of your Email.

Click

【

Send Test

】

after configuration, the following diagram will be displayed to ask you to input

the Email for receiving.

Specify the email address and click

【

Send

】

-to send the test email. Verify that email was

successfully sent or not.

If no email was received, please modify the SMTP settings and

retry.

3.4 Email to Fax

Users can send fax by Email. Please configure as below.

Summary of Contents for VPX-100






























































































Search results

Summary of Contents for VPX-100

Reviews:

voptech VPX-100, User Manual, Page: 50 / 93

Search results

Summary of Contents for VPX-100

Reviews: