voptech VPX-100 User Manual Download Page 47

Page: 47 / 93

Global Analog Settings

Click

【

Advance

】

【

Options

】

【

Global Analog Settings

】

：

Reference:

Item

Explanation

Caller ID Detection

Enable/Disable Caller ID Detection

Caller ID Signaling

Select the mode of Caller ID Signaling.

Caller ID Start

Ring--Caller ID start before ring.

Polarity--Caller ID start when polarity reversal starts.

CID Buffer Length

Default CID Buffer Length

Opermode

Set the Opermode for FXO/GSM Ports.

ToneZone

Select the ToneZone in your country.

Relax DTMF

Enable/Disable Relax DTMF inspection.

Echo Cancel

Enable/Disable Echo Cancel

Echo Training

Set Echo Training (default unit: ms)

Busy Detection

Enable/Disable Busy Detection.

Busy Count

Count the Busy Detection. It will be active when enable Busy Detection.

Global SIP Settings

【

Global SIP Settings

】

is appropriate for advanced administrators.

Please contact our

technical support department before modifying anything in this section.

Summary of Contents for VPX-100






























































































Search results

Summary of Contents for VPX-100

Reviews:

voptech VPX-100, User Manual, Page: 47 / 93

Search results

Summary of Contents for VPX-100

Reviews: