background image

EN

5

WWW.VONROC.COM

away from moving parts. Loose clothes, jewellery 

or long hair can be caught in moving parts.

g)   If devices are provided for the connection of dust 

extraction and collection facilities, ensure these 

are connected and properly used. Use of dust 

collection can reduce dust related hazards.

4)   Power tool use and care

a)  

Do not force the power tool. Use the correct po-

wer tool for your application. The correct power 

tool will do the job better and safer at the rate for 

which it was designed.

b)   Do not use the power tool if the switch does not 

turn it on and off. Any power tool that cannot be 

controlled with the switch is dangerous and must 

be repaired.

c)  

Disconnect the plug from the power source and/

or the battery pack from the power tool before 

making any adjustments, changing accessories, 

or storing power tools. Such preventive safety 

measures reduce the risk of starting the power 

tool accidentally.

d)  Store idle power tools out of the reach of child-

ren and do not allow persons unfamiliar with the 

power tool or these instructions to operate the 

power tool. Power tools are dangerous in the 

hands of untrained users.

e)  

Maintain power tools. Check for misalignment or 

binding of moving parts, breakage of parts and 

any other condition that may affect the power 

tool’s operation. If damaged, have the power tool 

repaired before use. Many accidents are caused 

by poorly maintained power tools.

f)  

Keep cutting tools sharp and clean. Properly 

maintained cutting tools with sharp cutting edges 

are less likely to bind and are easier to control.

g)  Use the power tool, accessories and tool bits etc. 

in accordance with these instructions, taking 

into account the working conditions and the 

work to be performed. Use of the power tool for 

operations different from those intended could 

result in a hazardous situation.

5)   Battery tool use and care

a)  

Recharge only with the charger specified by 

the manufacturer. A charger that is suitable for 

one type of battery pack may create a risk of fire 

when used with another battery pack.

b)  

Use power tools only with specifically designa-

ted battery packs. Use of any other battery packs 

may create a risk of injury and fire.

c)   When battery pack is not in use, keep it away 

from other metal objects, like paper clips, coins, 

keys, nails, screws or other small metal objects 

that can make a connection from one terminal to 

another. Shorting the battery terminals together 

may cause burns or a fire.

d)   Under abusive conditions, liquid may be ejected 

from the battery; avoid contact. If contact acci-

dentally occurs, flush with water. If liquid contacts 

eyes, additionally seek medical help. Liquid ejec-

ted from the battery may cause irritation or burns.

6)   Service

a)  

Have your power tool serviced by a qualified 

repair person using only identical replacement 

parts. This will ensure that the safety of the 

power tool is maintained.

ADDITIONAL SAFETY WARNINGS FOR  

COMBITOOLS

•    Always keep the cord away from the moving 

parts of the machine.

•    In the case of locking, switch the machine off im-

mediately and remove the plug from the mains.

•    Compare the maximum number of revolutions 

allowed of the accessories with the number of 

revolutions of the machine.

•    When you put the machine away the engine must 

be switched off and moving parts must have 

reached a standstill.

•    Never attach an assembly spanner to your ma-

chine with a piece of string or anything similar.

•    Never use the axle locking button if the machine 

is operating.

•    Make sure that the spring chuck diameter is the 

same as the axle diameter of the accessory.

•    Use a clamping device for securing the work piece.

•   Keep your hands away from the work piece.

Electrical safety

When using electric machines always observe the 

safety regulations applicable in your country to 

reduce the risk of fire, electric shock and personal 

injury. Read the following safety instructions and 

also the enclosed safety instructions. 

 Always check that the power supply 

corre sponds to the voltage on the rating plate.

Class II machine - Double insulation -  

You don’t need any earthed plug

Summary of Contents for Bravo 3-in-1 Potty

























Reviews: