911352_00(5) Page 5 of 8
INSTALLATION
2
Drill 5/8” diameter cable hole
midway between end cap bracket
holes. Do not drill through other
side of door. Run Chexit cable
through cable hole and door back
box. Install door back box.
5/8” dia.
3
Connect cable wires to same
color power transfer door side
wires. Install door side of EPT-10
(shown) or finish installing
electric hinge.
4
Slide module into cover plate
as shown.
1
Remove end cap, end cap bracket,
and cover plate from Chexit device.
End cap bracket
Cover plate
End cap
Support hinge end of
mechanism case while end
cap bracket is not installed.
CAUTION
!
