14
8
BOTTOM LATCHBOLT CLEARANCE
8a
Remove tape holding bottom bolt in place from bottom
of door.
For 2-Point Latch Only
8b
Adjust bottom latchbolt clearance.
I
A fl ashlight would be useful during adjustment.
Push
bottom spool input
upward until flat of input
hits stop. Input should lock in place.
For 2-Point Latch Only
Reach inside center slide and push downward on shelf of
top
spool input
to release top latch, if not already retracted. Line
shown in Step 4d-3 should no longer be visible.
stop
b-1
b-2
b-3
Turn
bottom spool screw
counterclockwise approximately
20 turns to remove slack. Continue turning until bolt just
clears top of strike (b-4).
bolt
strike
b-4
³⁄₈
" standard
undercut
NOTE:
If clicking noises are heard during counterclockwise
adjustment, unwind the cable with one-half turn clockwise.
Then, continue counterclockwise adjustment. If clicking
persists, check to be sure cable is not caught on an edge.
!
8c
Perform bottom latch functional test.
For 2-Point Latch Only
c-1. Confi rm bottom latchbolt does not drag against fl oor when
door is opened.
c-2.
With door closed, bottom latch should be secure.
