Volvo XC90 T8 TwinEngine Plug-In Hybrid, Owner'S Manual

Page: 271 / 534

DRIVER SUPPORT
}}
* Option/accessory, for more information, see Introduction. 269
•
the lane's side market lines are missing,
badly faded or cross each other.
•
the division of lanes is not clear, e.g.,
when a line divides or merges with
another, at exits or if there are many road
signs/markers.
•
if there are edges or other lines on or
near the lane, e.g., curbs, cracks, repaired
areas, sharp shadows, etc.
•
the lane is narrow or winding.
•
the weather conditions (rain, snow, fog,
slush, poor visibility, backlighting, etc).
The driver should also be aware that Pilot
Assist has the following limitations:
•
High curbs, barriers and temporary obsta-
cles (cones, barriers etc) may not be
detected or could be detected incorrectly
as side marker lines, which may create a
risk of collision. The driver must ensure a
safe distance to these obstacles.
•
The camera or radar sensor may not be
able to detect objects if there are pot-
holes or if there are stationary objects
partially or completely blocking the road.
•
Pilot Assist does not "see" pedestrians,
animals, etc.
•
Pilot Assist's steering capacity is limited
and may not always be able to help the
driver keep the vehicle in the lane.
Hands on the steering wheel
Pilot Assist only functions when the driver's
hands are on the steering wheel
, which is con-
tinuously monitored by the system. If this is not
the case, the driver will be alerted by a text mes-
sage in the instrument panel. If the driver's hands
are not returned to the steering wheel, an audible
signal will sound.
If the driver does not return his/her hands to the
steering wheel after the audible signal, Pilot
Assist will go into standby mode and must be
reactivated by pressing
.
Related information
•
Pilot Assist
*
(p. 265)
Deactivating/resuming Pilot Assist
Putting Pilot Assist in standby mode
Function buttons and symbols
1. Press the
button (1).
> Pilot Assist will go into standby mode.
2. Press the
◀
button (2).
> Pilot Assist will be turned off and shift to
ACC in standby mode.
or
–
Press the
◀
button (2).
> Pilot Assist will be turned off and switch
to ACC in active mode.