Volvo XC90 T8 TwinEngine Plug-In Hybrid, Owner'S Manual

Page: 142 / 534

INSTRUMENTS AND CONTROLS
140
With the headlight ring in the 8 position
and the ignition in mode II or if the engine is
running
:
•
In the
US
: DRL will be
off
•
In
Canada
: DRL will be
on
With the headlight ring in the position:
•
DRL will be
on
(the low beam headlights will
automatically switch on in dark conditions)
US models only
: DRL can be deactivated in the
center display's Settings view.
With selected, a tunnel detection function
activates the low beams when the vehicle enters
a tunnel.
With the headlight ring in the position:
•
DRL will be
off
and the low beam headlights
will be
on
High and low beam headlights
When the engine is started, the low beams are
activated automatically if the headlight control is
in position
.
Steering wheel lever and ring
High beam flash
Toggle between high and low beams
High beam flash
Pull the lever slightly toward the steering wheel.
The high beams illuminate until the lever is
released.
Continuous high beams
Continuous high beams are available if the ring is
turned to
9
or . Toggle to high beams
by moving the lever forward. Return to low beams
by moving the lever toward the steering wheel.
The symbol will illuminate in the instrument
panel when the high beams are on.
Active high beams
The active high beam system uses a camera at
the upper edge of the windshield to detect the
headlights of oncoming vehicles or the taillights
of a vehicle directly ahead. When this happens,
the headlights will automatically switch from high
beams to low beams.
When the camera no longer detects the head-
lights/taillights of other vehicles, your headlights
will switch back to high beams after several sec-
onds.
8 The parking lights will be on in this position, even if the ignition is switched off.
9 When the low beams are on.