Volvo S40 - ANNEXE 244, Owner'S Manual

Page: 65 / 316

02 Instruments and controls
Left-hand stalk switch
02
``
65
Stalk switch positions
3
4
1
2
1
2
G026380
Short flash sequence, direction indicators
Continuous flash sequence, direction indi-
cators
Main beam flash and switching from main
to dipped beam
Home safe lighting and switching from
dipped to main beam
Direction indicators
Continuous flash sequence
Move the stalk switch up or down to
end position (2).
The stalk switch remains in its end position and
is moved back manually, or automatically by
steering wheel movement.
Short flash sequence
Move the stalk switch up or down to
position (1) and release.
The direction indicators flash three times and
the stalk switch returns to its home position.
Main beam flash
Move the stalk switch gently towards the
steering wheel to position (3).
Main beam comes on until the stalk switch is
released. Main beam flash only works when the
remote control key is inserted in the ignition
switch.
Switching, main and dipped beam
The remote control key must be in position II
and the headlamp control in end position, see
page 62, for main beam to be switched on.
Activating main beam:
Move the stalk switch towards the steering
wheel to the end position (4) and release.
Deactivating main beam:
Move the stalk switch towards the steering
wheel to position (3) and release.
Home safe lighting
Some of the exterior lighting can be kept
switched on to work as home safe lighting after
the car has been locked. The standard delay is
30
1
seconds, but can be changed to 60 or 90
seconds, see page 84.
1. Remove the remote control key from the
ignition switch.
2. Move the stalk switch towards the steering
wheel to the end position (4) and release.
3. Get out of the car and lock the door.
1 Factory settings.