Volvo Ingersoll Rand SD-116 TF Series, Operator'S Manual

Page: 82 / 300

SECTION 4 OPERATING INSTRUCTIONS
4-18 SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 4-21
5. Disconnect jack (3, Figure 4-21) from lug (7) by removing clip (6) and pin (5).
6. Reposition jack (3, Figure 4-21) to clevis plate (4) and attach with pin (5) and
clip (6).
7. Adjust ratchet mechanism (8, Figure 4-21) to the raise position. Move lever (1)
in the appropriate direction to raise the operator platform enough to remove
force from ROPS support bolts (1, Figure 4-22).
Figure 4-22
8. Remove bolts from the hydraulic tank side of the frame. Then, remove the bolts
from the jack side of the ROPS support (1,).
9. Continue raising the platform using jack (3, Figure 4-21).