manualshive.com logo in svg

Volvo Ingersoll Rand SD-116 TF Series, Operator'S Manual

Share
Download
Volvo Ingersoll Rand SD-116 TF Series Operator'S Manual Download Page 189

TECHNICAL SPECIFICATIONS

SECTION 7

SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX

7-5

SD-122 D/F/DX TERRA FIRMA SERIES VIBRATORY SOIL COMPACTORS

The SD-122D, SD-122F, and SD-122DX Compactors meet or exceed all federal 
Environmental Protection Agency (EPA), and Occupational Safety & Health Administration 
(OSHA) requirements. Acoustic information is detailed below.

Noise Emission

In accordance with the requirements of clause 1.7.4 (f) of Annex 1 of Council Directive 
..Relating to Machinery 98/37/EC, the following values were measured: 

•

Equivalent continuous A-weighted sound pressure level at operator’s station:
(Leq.A) = 89.0 dB(A), Engine only; and 90 dB(A) with Vibration On. 
For units with cab: = 82.0 dB (A), Engine only; and 83 dB(A) with Vibration On.

•

A-weighted sound power level of the machine: (Lw) = 112.0 dB(A) Vibration On.

These measurements were recorded in accordance with the requirements of ISO 6394, ISO 
6395 and ISO 6396, with the engine running at manufacturer’s rated speed. 

Operator’s Exposure to Vibration

In accordance with the requirements of Clause 3.6.3 (a) of Annex 1 of Council 
Directive..Relating to Machinery 98/37/EC, the following values were measured: 

•

Arms/hands: The weighted root mean square acceleration value
to which hands are subjected (Aeq) = does not exceed 2.5 m/s2. 

•

Body/posterior: The weighted root mean square acceleration value to 
which the body is subjected (Aeq) = does not exceed 0.5 m/s2.

These measurements were recorded in accordance with the requirements of ISO 5349 and 
ISO 2631, with the compactor’s engine running at manufacturer’s rated speed and drum 
vibration at maximum frequency and corresponding maximum amplitude.

Summary of Contents for Ingersoll Rand SD-116 TF Series













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands