Volvo Ingersoll Rand SD-116 TF Series, Operator'S Manual

Page: 170 / 300

SECTION 5 MAINTENANCE INSTRUCTIONS
5-72 SD-116F/DX/122D/F/DX/160F/DX/190DX/200F/DX
Figure 5-85
Change Drum Drive (Torque Hub) Oil Level - SD 200
The SD 200 drum drive assembly is equipped with a single fill and drain hole equipped with a
spring loaded cap. The fill/drain hole rotates with the drum. It must be positioned at the 12
0’clock position to add oil and at the 6 o’clock position to drain oil with the use of a clear
standpipe supplied with the SD 200. Access to the spring loaded can is thru access holes in
the drum drive mounting bracket.
1. Park the machine on a level surface with the single drain/fill port on the drive
located at the 6 o’clock location.
2. Allow drive motor case to cool if necessary.
3. Remove one of the two hex allen head oil fill/level check plugs located at the 9
o’clock position or (1, Figure 5-86) located at the 3 o’clock position.
Figure 5-86
4. Insert standpipe supplied with the machine through access hole in the drum
drive mount and into spring-loaded cap.
5. Drain oil into a suitable container.