Volvo 322001, Operator'S Manual

Page: 73 / 414

N N OTE!
When the delay time is shown, press and hold the SELECT button
to enter the owner code.
- There are 3 levels for authorizing machine operation.
Level 1: This is the operator code with 4 digits which are set
by the machine owner in IC menu or CareTrack portal.
Level 2: This is a machine owner PIN code with 6 digits
which are set using Volvo's service tool.
Level 3: This is a one-time code with 8 digits which are
obtained from the CareTrack portal.
Ge e o o fe e nc c e brok k en n
- When the machine owner activates a geofence in the
CareTrack portal and the machine is outside the geofence, the
geofence broken message will appear on the IC.
- When the machine owner activates a geofence and configures
automatic immobilization in the CareTrack portal and the
machine is outside the geofence, the geofence broken warning
message will appear on the IC and the machine is immobilized
at the next stop.
- WECU sends the warning message to the CareTrack portal.
- The warning condition is revoked when the machine is inside
the geofence.
V1137932
0
Enter owner code:
Enter owner code
V1137933
Geofence broken
GO BACK TO SITE
V1137934
Geofence broken
Immobilization at next stop
In n s s tr r u u m m e e n n t t pa a n n e e l l s s
Di i s s pl l a a y y un n i i t t 71 1