Rotating parts and hot surfaces
DANGER!
Working with or approaching a running engine is a
safety risk. Watch out for rotating components and hot
surfaces.
If the engine is in operation and operates another
device, you must not, under any circumstances,
staying close to the engine.
Work on running engines is strictly prohibited. There
are however adjustments that require the engine to be
run. Approaching a running engine is a safety risk.
Loose clothing and long hair can get caught in the
rotating parts; careless movements or a dropped tool
can lead to serious personal injury.
Be careful to avoid hot surfaces (exhaust pipes,
turbochargers, charge air manifolds, start elements
etc.) and hot fluids in pipes and hoses on engines that
are running or have just stopped. Re-install all
protective covers that were removed during
maintenance work before starting the engine.
Information on the engine
IMPORTANT:
Make sure that all warning and information decals on
the product are always visible. Replace decals which
have been damaged or painted over.
Prohibition on use of start spray
WARNING!
Never use start spray or similar agents to start an
engine. This may cause an explosion in the inlet
manifold. Risk of personal injury.
P0024808
P0024483
Safety Information
8
47711296 01-2019 © AB VOLVO PENTA
Summary of Contents for TAD1340VE
Page 1: ...Operator s manual 16L TP 6662 1 19d ...
Page 102: ......
Page 104: ......
Page 106: ...AB Volvo Penta SE 405 08 Göteborg Sweden www volvopenta com 47711296 English 01 2019 ...