Volvo Penta 8400 Owner'S Manual Download Page 5

Page: 5 / 108

Setting and Following an Auto Guidance
Path...................................................... 30
Creating and Saving an Auto Guidance
Path...................................................... 30
Adjusting a Saved Auto Guidance
Path...................................................... 30
Canceling an Auto Guidance Calculation
in Progress............................................30
Setting a Timed Arrival......................... 30
Auto Guidance Path Configurations..... 30

Tracks.......................................................31

Boundaries............................................... 32

Creating a Boundary............................. 33
Converting a Route to a Boundary....... 33
Converting a Track to a Boundary........ 33
Editing a Boundary............................... 33
Linking a Boundary to a SmartMode
Layout................................................... 33
Setting a Boundary Alarm..................... 33
Disabling all Boundary Alarms.............. 33
Deleting a Boundary............................. 33

Deleting All Saved Waypoints, Tracks,
Routes, and Boundaries........................... 33

Sailing Features.................................. 33

Setting the Vessel Type for Sailing
Features................................................... 33
Sail Racing............................................... 33

Starting Line Guidance......................... 33
Starting the Race Timer........................ 34
Stopping the Race Timer...................... 34
Setting the Distance between the Bow
and the GPS Antenna........................... 34

Laylines Settings...................................... 34

Polar Tables............................................. 34

Importing a Polar Table Manually......... 35
Showing Polar Data in Data Fields....... 35

Setting the Keel Offset............................. 35
Heading Line and Angle Markers............. 35

Setting the Heading Line and Angle
Markers................................................. 36

Water Sport Controls......................... 36

Creating a Water Sports User Preset....... 36

Renaming a User Preset Button........... 36

Setting the Boat RPM or Speed............... 36

Setting the Speed Source..................... 36

Adjusting the Trim Tabs........................... 36
Adjusting the Power Trim......................... 36
Adjusting the Ballast Tank Levels............ 36

Ballast Tank Tips.................................. 37
Adjusting Ballast Tank Drain and Fill
Times.................................................... 37

Turning on the Trim Assist Feature.......... 37
Adjusting the Boat Load........................... 37

Sonar Fishfinder................................. 37

Stopping the Transmission of Sonar
Signals......................................................37
Traditional Sonar View............................. 37

Split-Frequency Sonar View................. 37
Split-Zoom Sonar View......................... 38

Garmin ClearVü Sonar View.................... 38
Garmin SideVü Sonar View......................38

SideVü Scanning Technology...............38
Measuring Distance on the Sonar
Screen.................................................. 38

Panoptix Sonar Views.............................. 38

LiveVü Down Sonar View..................... 39
LiveVü Forward Sonar View................. 39
RealVü 3D Forward Sonar View........... 39
RealVü 3D Down Sonar View............... 39
RealVü 3D Historical Sonar View......... 40
FrontVü Sonar View..............................40

LiveScope Sonar View............................. 40
Perspective View...................................... 40
Selecting the Transducer Type................ 40
Selecting a Sonar Source.........................41

Renaming a Sonar Source................... 41

Creating a Waypoint on the Sonar
Screen...................................................... 41
Pausing the Sonar Display....................... 41
Viewing Sonar History.............................. 41
Sonar Sharing.......................................... 41

Table of Contents

iii

Summary of Contents for 8400













































































































Search results

Summary of Contents for 8400

Reviews:

Related manuals for 8400

Brands by name

Popular brands

Volvo Penta 8400, Owner'S Manual

Search results

Summary of Contents for 8400

Reviews:

Related manuals for 8400

Brands by name

Popular brands