Saving the Active Track
The track currently being recorded is called the active
track.
1
Select
Info
>
User Data
>
Tracks
>
Save Active
Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log
.
3
Select
Save
.
Viewing a List of Saved Tracks
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
Editing a Saved Track
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Review
>
Edit Track
.
4
Select an option:
• Select
Name
, and enter the new name.
• Select
Track Color
, and select a color.
• Select
Save as Route
to save the track as a route.
• Select
Save as Boundary
to save the track as a
boundary.
Saving a Track as a Route
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Review
>
Edit Track
>
Save as Route
.
Browsing for and Navigating a Recorded Track
Before you can browse a list of tracks and navigate
to them, you must record and save at least one track
(
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Follow Track
.
4
Select an option:
• To navigate the track from the starting point used
when the track was created, select
Forward
.
• To navigate the track from the destination point used
when the track was created, select
Backward
.
5
Review the course indicated by the colored line.
6
Follow the line along each leg in the route, steering to
avoid land, shallow water, and other obstacles.
Deleting a Saved Track
1
Select
Info
>
User Data
>
Tracks
>
Saved Tracks
.
2
Select a track.
3
Select
Review
>
Delete
.
Deleting All Saved Tracks
Select
Info
>
User Data
>
Delete User Data
>
Saved
Tracks
.
Retracing the Active Track
The track currently being recorded is called the active
track.
1
Select
Info
>
User Data
>
Tracks
>
Follow Active
Track
.
2
Select an option:
• Select the time the active track began.
• Select
Entire Log
.
3
Review the course indicated by the colored line.
4
Follow the colored line, steering to avoid land, shallow
water, and other obstacles.
Clearing the Active Track
Select
Info
>
User Data
>
Tracks
>
Clear Active
Track
.
The track memory is cleared, and the active track
continues to be recorded.
Managing the Track Log Memory During Recording
1
Select
Info
>
User Data
>
Tracks
>
Active Track
Options
.
2
Select
Record Mode
.
3
Select an option:
• To record a track log until the track memory is full,
select
Fill
.
• To continuously record a track log, replacing the
oldest track data with new data, select
Wrap
.
Configuring the Recording Interval of the Track Log
You can indicate the frequency at which the track plot is
recorded. Recording more frequent plots is more accurate
but fills the track log faster. The resolution interval is
recommended for the most efficient use of memory.
1
Select
Info
>
User Data
>
Tracks
>
Active Track
Options
>
Interval
.
2
Select an option:
• To record the track based on a distance between
points, select
Interval
>
Distance
>
Change
, and
enter the distance.
• To record the track based on a time interval, select
Interval
>
Time
>
Change
, and enter the time
interval.
• To record the track plot based on a variance
from your course, select
Interval
>
Resolution
>
Change
, and enter the maximum error allowed from
the true course before recording a track point. This
is the recommended recording option.
Boundaries
CAUTION
The Beeper setting must be turned on to make alarms
audible (
). Failure
to set audible alarms could lead to injury or property
damage.
32
Navigation with a Chartplotter
