VPA 7748089 English 09-2007
35
Engine — 5.0 & 5.7 Litre
6.
Loosen the hose clamp on the lower fuel cell cooling line and
remove hose from fuel cell. Allow water to drain from hose.
7.
Reinstall all hoses and secure all clamps in the same orienta-
tion as removed.
Draining seawater from the Closed
Cooling System
1.
With the engine turned off locate and loosen the lower drain cap
from the heat exchanger (1). After water has completely
drained, retighten the lower drain cap of the heat exchanger to
18-30ft.lb. (25-41 Nm).
2.
Note the hose orientation on the raw water pump. Loosen the
hose clamps and remove the hoses from the raw water pump.
Crank the engine briefly, (1 or 2 crankshaft revolutions) but do
not start the engine, to clear the water from the pump. Reinstall
the hoses and secure the clamps in the same orientation as
removed.
51059
B
A
