9
3.5 Mounting position of the inverter
The inverter may be mounted on a horizontal or vertical service. Away from heat sensitive
materials & flammable items. (Follow All Safety Instructions).
3.6 Connections
Follow the connection sequence described below.
Step 1:
Ensure that the ON/OFF switch on the Inverter is in the OFF position. If the
power source is a DC power supply, switch it OFF as well.
Step 2:
Connect inverter to power source.
Connect the DC cables to the DC battery terminals on the rear panel of the inverter.
The red
terminal is
positive (+)
and the black terminal is negative
(-). (See Page 5, 2.2B )
Step 3
: Connect inverter to appliances.
Make sure the load power within the rated power of inverter and the start power should not
exceed the peak power of the inverter.
Step 4
: Turn on the inverter 1
st
, then turn on the appliance you want to run.
If you are operating several loads from the power inverter, turn them on separately after the
inverter has been turned on. This will ensure that the power inverter does not have to deliver the
starting currents for all the loads at once.
4. IMPORTANT SAFETY INSTRUCTIONS
Incorrect installation and misuse of the inverter may result in danger to the user or hazardous
conditions.
1.
Do not attempt to connect the output to any other power source, including any AC mains.
2.
Make sure the opening to the ventilation fan and vent holes are not blocked.
3.
Avoid pulling on the cords and cables. Always grip plugs firmly when unplugging from
power source and when disconnecting cables.
4.
To avoid electrical hazard, be sure to unplug the inverter from its external power source
before inserting the AC plug.
5.
For indoor use only. Avoid exposure to external heat sources including direct/prolonged
sunlight, dust, corrosive chemicals and moisture.
6.
It is normal for inverters to become warm during use. Avoid touching the device during use
or positioning near heat-sensitive materials.
7.
Do not drop or subject the inverter to undue shock.
8.
Do not place anything on top of the inverter.
9.
The use of improper cables, connectors, or accessories not supplied with this product
constitutes misuse and may result in injury or damage.
10.
Do not attempt to service or dissemble. The unit is not user-serviceable. Attempting to
disassemble or service the unit can result in electrical hazard, including death from
High-Voltage electric shock! If you experience problems with the unit, discontinue use and
contact a competent Technician or the original place of purchase.
11.
When cleaning the inverter, please switch off power & unplug the inverter. Carefully clean
with a dry cloth. Do not use wet cloth or cleanser.
