4
C. AC Output Receptacle: Australia
(10Amp)
D. Vent Outlet.
Allows hot air pushed from the rear cooling fan to exit. Therefore it MUST be kept clear
whenever the power inverter is to be used.
E. Chassis Ground (
some models
)
Properly grounds the Inverter to vehicle grounding system or to earth ground.
G.
Remote Switch Port
(Optional):
Use to connect the remote ON/OFF switch via a communication cable.
H. Hardwire Terminal Block
(2500W to 6000W)
:
Note: When the load current is >10A (2300W) You must use the output terminal connection which
can be found inside the AC output panel of the inverter.
Ensure the inverter is turned off & DC input is disconnected before opening the cover to
connect the Hard Wire option.
Seek professional assistance if you are unfamiliar with electrical wiring.
Check with local authorities as regulations may apply.
I. USB Port (Optional):
USB Port provides power to operate and charge USB-enabled devices.
