VOLTCRAFT DSO 4000 Series User Manual Download Page 45

Page: 45 / 53

Recalling panel settings

Procedure

1. (For recalling from an

external SD card) Insert the

card into the slot.

2. Press the Save/Recall key.

Save/Recall

3. Press

Recall Setup

4. Press

Source

repeatedly to

select the file source,

internal or external

memory. Use the Variable

knob to change the memory.

VARIABLE

Memory

Internal memory, S1 ~ S15

card

External card, no practical

limitation on the amount of file. The

setup file must be placed in the root

directory to be recognized.

5. Press

Recall

to confirm

recalling. When completed,

a message appears at the

bottom of the display.

Note

The file will not be saved if the

power is turned Off or SD card is

disconnected before completion.

File utilities

To edit SD card contents

(create/ delete/ rename files

and folders), press

File Utilities

For details, see page74.

DSO-4000 User Manual

Recalling a waveform

Procedure

1. (For recalling from an

external SD card) Insert the

card into the slot.

2. Press the Save/Recall key.

Save/Recall

3. Press

Recall Waveform

. The

display shows the available

source and destination

options.

4. Press

Source

repeatedly to

select the file source,

internal memory or external

SD card. Use the Variable

knob to change the memory

location (W1 ~ W15).

VARIABLE

Memory

Internal memory, W1 ~ W15

card

External flash drive, no

practical limitation on the

amount of file. The waveform

file must be placed in the root

directory to be recognized.

5. Press

Destination

. Use the

Variable knob to select the

memory location.

VARIABLE

RefA,

Internally stored reference

waveforms A, B

Summary of Contents for DSO 4000 Series






















































Search results

Summary of Contents for DSO 4000 Series

Reviews:

Related manuals for DSO 4000 Series

Brands by name

Popular brands

VOLTCRAFT DSO 4000 Series, User Manual

Search results

Summary of Contents for DSO 4000 Series

Reviews:

Related manuals for DSO 4000 Series

Brands by name

Popular brands