VOLTCRAFT DSO 4000 Series User Manual Download Page 41

Page: 41 / 53

Saving the panel settings

Procedure

1. (For saving to an external

SD card) Insert the card into

the slot.

2. Press the Save/Recall key

twice to recall the Save

menu.

Save/Recall Save/Recall

3. Press

Save Setup

4. Press

Destination

repeatedly

to select the saved location.

Use the Variable knob to

change the internal memory

location (S1 ~ S15).

VARIABLE

Memory

Internal memory, S1 ~ S15

card

External card, no practical

limitation for the amount of file.

When saved, the setup file will be

placed in the root directory.

5. Press

Save

to confirm

saving. When completed, a

message appears at the

bottom of the display.

Note

The file will not be saved if the

power is turned off or SD card is

disconnected before completion.

File utilities

To edit SD card contents

(create/ delete/ rename files

and folders), press

File Utilities

For details, see page74.

DSO-4000 User Manual

Saving the waveform

Procedure

1. (For saving to an external

SD card) Insert the card into

the slot.

2. Press the Save/Recall key

twice to recall the Save

menu.

Save/Recall Save/Recall

3. Press

Save Waveform

4. Press

Source

. Use the

Variable knob to select the

source signal.

VARIABLE

CH1 ~ CH2

Channel 1 ~ 2 signal

Math

Math operation result (page46)

RefA,

Internally stored reference

waveforms A, B

5. Press

Destination

repeatedly

to select the file destination.

Use the Variable knob to

select the memory location.

VARIABLE

Memory

Internal memory, W1 ~ W15

card

External card, no practical

limitation for the amount of file.

When saved, the waveform will be

placed in the root directory.

Ref

Internal reference waveform, A/B

Summary of Contents for DSO 4000 Series






















































Search results

Summary of Contents for DSO 4000 Series

Reviews:

Related manuals for DSO 4000 Series

Brands by name

Popular brands

VOLTCRAFT DSO 4000 Series, User Manual

Search results

Summary of Contents for DSO 4000 Series

Reviews:

Related manuals for DSO 4000 Series

Brands by name

Popular brands