VOLTCRAFT DSO 4000 Series User Manual Download Page 43

Page: 43 / 53

Waveform

data

(Axxxx.csv)

Two types of waveform data

are saved: the currently active

channel data and the last

internally saved data (one of

W1 ~ W15).

4. Press

Ink Saver

repeatedly to

invert the background color

(on) or not (off) for the

display image.

5. Press

Destination

card

External card, no practical

limitation for the amount of file.

When saved, the folder will be

placed in the root directory.

6. Press

Save

to confirm

saving. When completed, a

message appears at the

bottom of the display.

Note

The file will not be saved if the

power is turned off or SD card is

disconnected before completion.

7. Together with the current setup/waveform/

image, the last saved waveform file (one from

W1 ~ W15) and setup file (one from S1 ~ S15)

are also included in the folder.

File utilities

To edit SD card contents

(create/ delete/ rename files

and folders), press

File Utilities

For details, see page74.

DSO-4000 User Manual

Recall

File type/source/destination

Item

Source

Destination

Default panel

setup

•

Factory installed

setting

•

Current front panel

Reference

waveform

•

Internal memory: A, B

•

Current front panel

Panel setup

(DSxxxx.set)

•

Internal memory: S1 ~

S15

•

External memory: SD

card

•

Current front panel

Waveform data

(DSxxxx.csv)

•

Internal memory: W1 ~

W15

•

External memory: SD

card

•

Reference waveform

A, B

SD Card

restriction

The DSO-4000 series accept the following SD card.
Size: 2GB or less
Format: FAT or FAT32

Recalling the default panel settings

Procedure

1. Press the Save/Recall key.

Save/Recall

2. Press

Default Setup

. The

factory installed setting will

be recalled.

Setting contents

The following is the default panel setting contents.

Acquisition

Mode: Normal

Channel

Coupling: DC

Invert: Off

BW limit: Off
(DSO-4102, DSO-4062)

Probe attenuation: x1

Summary of Contents for DSO 4000 Series






















































Search results

Summary of Contents for DSO 4000 Series

Reviews:

Related manuals for DSO 4000 Series

Brands by name

Popular brands

VOLTCRAFT DSO 4000 Series, User Manual

Search results

Summary of Contents for DSO 4000 Series

Reviews:

Related manuals for DSO 4000 Series

Brands by name

Popular brands