37
Waveform
operation
Waveforms can be moved or scaled in both the
Run and Stop mode. For details, see page54
(Horizontal position/scale) and page58 (Vertical
position/scale).
Changing the horizontal position and scale
For more detailed configurations, see page54.
The horizontal position knob
moves the waveform left or right.
Setting the
horizontal
position
The position indicator moves along with the
waveform and the distance from the center point is
displayed as the offset in the upper side of the
display.
DSO-4000 User Manual
38
To select the timebase (scale), turn
the TIME/DIV knob; left (slow) or
right (fast).
TIME/DIV
Selecting the
horizontal scale
Range
1ns/Div
~
10s/Div,
1-2-5
increment
Changing the vertical position and scale
For more detailed configuration, see page58.
To move the waveform up or
down, turn the vertical position
knob for each channel.
Set vertical
position
As the waveform moves, the vertical position of
the cursor appears at the bottom left corner of the
display.
Run/Stop mode
The waveform can be moved
vertically in both Run and Stop
mode.
To change the vertical scale,
turn the VOLTS/DIV knob; left
(down) or right (up).
VOLTS/DIV
Range
2mV/Div ~ 5V/Div, 1-2-5 increments
Select vertical
scale
The vertical scale indicator for each channel on the
bottom left of the display changes accordingly.
Stop mode
In Stop mode, the vertical scale
setting can be changed but the
waveform shape stays the same.
