VOLTCRAFT DSO 4000 Series User Manual Download Page 36

Page: 36 / 53

Remote Control Interface

The Remote control interface section describes how to set up the

USB interface for PC connection. The details of remote control

commands are described in the DSO-4000 Programming Manual.

PC side

Type A, host

USB connection

DSO-4000 side

Type B, slave

Speed

1.1/2.0 (full speed)

Procedure

1. Connect the USB cable to

the USB slave port.

2. When the PC asks for the USB driver, select

dso_cdc_1000.inf which is downloadable from

the attached CD-R.

3. On the PC, activate a terminal application such

as MTTTY (Multi-Threaded TTY). To check the

COM port No., see the Device Manager in the

PC. For WindowsXP, select Control panel

System Hardware tab.

4. Run this query command via the terminal

application.

*idn?

This command should return the manufacturer,

model number, serial number, and firmware

version in the following format.

Conrad, DSO-4xxx, 000000001, V1.00

5. Configuring the command interface is

completed. Refer to the programming manual

for the remote commands and other details.

DSO-4000 User Manual

System Settings

The system settings show the oscilloscope’s system information and

allow changing the language.

Viewing the system information

Procedure

1. Press the Utility key.

Utility

2. Press

More

3. Press

System Info

. The upper

half of the display shows the

following information.

•

Manufacturer

•

Model

•

Serial number

•

Firmware version

4. Press any other key to go

back to the waveform

display mode.

Selecting the language

Parameter

Language selection differs according to the region

to which the oscilloscope is shipped.

•

English

•

Chinese (traditional)

•

Chinese (simplified)

•

Others

Procedure

1. Press the Utility key.

Utility

2. Press

Language

repeatedly to

select the language.

Summary of Contents for DSO 4000 Series






















































Search results

Summary of Contents for DSO 4000 Series

Reviews:

Related manuals for DSO 4000 Series

Brands by name

Popular brands

VOLTCRAFT DSO 4000 Series, User Manual

Search results

Summary of Contents for DSO 4000 Series

Reviews:

Related manuals for DSO 4000 Series

Brands by name

Popular brands