45
8. DISPLAY INDICATIONS AND SYMBOLS
The following symbols and information are present at the device or in the display.
AUTO
Automatic measuring range selection is active
OFF
Switch position “off”
HOLD
Call/switch off Data Hold function or function is active
MODE
Switching button for multiply assigned measuring function
RANGE
Button for manual measuring range selection and to switch to auto range
OL
Overflow display, the measuring area was exceeded
Battery change display; replace the batteries as soon as possible to avoid
measuring errors!
Symbol for the battery data used
Symbol for the diode test
Symbol for the acoustic continuity tester
AC
Symbol for alternating current
DC
Symbol for direct current
V, mV
Volt (unit of electric voltage), Milli-Volt (exp.–3)
A
Ampere (unit of electric current)
°C, °F
Degrees Celsius/degrees Fahrenheit (unit for the temperature)
Temp
Measuring function for temperature measuring
Ω, kΩ, MΩ Ohm (unit of electrical resistance), Kilo-Ohm (exp.3), Mega-Ohm (exp.6)
COM
Reference potential
Marks at the current probe for centring the conductor
Symbol for display illumination
Symbol for measuring point lighting
Read the instructions attentively
Summary of Contents for 1386328
Page 3: ...3...
